Concrete Release Agent, Liquid

Product Detail:

A liquid release for stamping tools and decorative concrete.

Clear Bond-Breaker, designed to prevent stamping tools from sticking to the concrete.

Unique blend of ingredients leaves no residue of any kind. Looks, feels and smells just like the reliable old bubble gum release, but the difference will be obvious to the trained professional.

Interior/Exterior use. Will extend tool/stamp life.

Liquid release is an alternative to dry powdered release, and designed to be used when a mottled, antiqued appearance is not desired.

Specifications:

Sold in 1, 5, or 55 gallon containers.

Coverage: Approximately 200-240 square feet per 1 gallon.

Use:

Apply using a pump-up type industrial sprayer, liberally spraying both concrete and stamping tools immediately prior to the stamping process.

Only apply the liquid release to small areas at a time- about 10 to 15 square feet (to avoid evaporation).

Clean up sprayer and stamping tools with water.

Do not use below 40° F.

Shipping Information:

This product usually ships withing 2-3 days, via UPS or Freight.

Concrete Stain, Acid Stain Sample Squares

Product Detail:

Acid Stain Sample Chips

11 Standard Acid Stain Colors: Ebony, Walnut, Mahogany, Coffee, Mission Brown, Weathered Terracotta, Caramel, Amber, Olive, Jade, Turquoise

Chip Pieces Constructed of Gray Concrete.

Each sample piece has been sealed with Superseal 2000, an acrylic concrete sealer.


Product Specifications:

Measurements: 3" x 4" each

Shipping Information:

Usually ships in 1-2 business days.

Product Video:

Concrete Stain, Acid Stain Sprayer

Product Detail:

Industrial Acid Sprayer for spraying Acid Stains, Acids, or other chemicals.

Wide opening for easy filling and cleaning.

Auto/manual high pressure relief valve.

"Lock-off" feature to prevent accidental discharge.

Product Specifications:

Open head sprayer.

Capacity: 2 gallons.

Pump Type: Poly.

Nozzle Type : Adjustable Poly, Coarse Stream to Fine Mist.

Use and Cleanup:

To use, simply open the top, fill with Acid Stain, close, pump to add air pressure, and then spray. Adjust nozzle tip to desired spray pattern.

Clean up: Release pressure before opening. Remove any Acid left in sprayer. Clean out sprayer, tubing, and nozzles using plenty of clean water.

Shipping Information:

Usually ships within 1-2 business days.

Concrete Stain, QuickDye Acetone Based Stain

Product Detail:

QuickDye™ is an alternative to Acid Stains. This product is easy to apply and can be sealed quickly.

QuickDye™ is mixed with acetone so it is important to have adequate ventilation and airflow. Use for small stain jobs or as a touch up for Acid Stain.

Can be used as a stand-alone color application on concrete, as a base coat prior to Acid Staining concrete in order to add color, or as a touch up to Acid Stained concrete in problem areas that did not react to acid stain

QucikDye has a wider color range to choose from that Acid Stains.

QuickDye™ is for interior application only. Color will fade over time in areas where the dye is exposed to frequent UV light.

Specifications:

QuickDye™ Powder: 8 oz. bottle. To be mixed with 4 oz. of Penetrating Additive (sold separately), and 1 gallon of acetone (not provided- sold at your local paint or hardware store).

Penetrating Additive: 20 oz. bottle (Sold from Drop-Down Menu above). To be mixed 4 oz. per gallon of QuickDye/acetone (Each 20 oz. bottle will treat 5 gallons of QuickDye/acetone).

Coverage: 400-600 square feet per gallon of QuickDye/Acetone, per coat. Coverage may vary based on concrete texture and mix.

View TDS (Technical Data Sheet) for full application and instruction information.

View MSDS (Material Safety Data Sheet).

Application:

Please view above TDS link for full application instructions.

Shipping Information:

QuickDye Standard Colors usually ship within 1-2 business days, via UPS.

QuickDye Special Order Colors usually take about one week to make and ship out.

Color Charts and Sample Photos:



Above: Standard Colors for Concrete QuickDye Acetone-Based Stain.




Above: Special Order Colors for Concrete QuickDye Acetone-Based Stain.






family="arial,tahoma" color="#000000" size="-2">

Concrete Stain, Vivid Tintura

Product Detail:


LITHOCHROME® Tintura™ Stain is a low VOC, environmentally friendly stain that includes vivid reds, yellows, blues, pastel pinks and beiges and even grays. The waterborne stain penetrates and bonds with porous concrete or cementitious toppings for permanent, nonfading, predictable colors. When finished with the compatible sealer, it is durable enough for interior floors, walls, columns and other decorative features.



LITHOCHROME® Tintura™ Stain must be applied full strength without thinning. The coverage will vary depending on the method of application, the porosity and texture of the surface, and the appearance desired. One, two, or three coats may be required to produce the desired color effect and intensity on colored or uncolored concrete and cementitious toppings.



Coverage: The recommended coverage rate is 1000-1200 square feet per gallon (25-30 square meters per liter) per coat. Maximum: 3 Coats.




Packaging: Available by Pint (premixed), or Gallon (2 separate containers: 1-Gallon of uncolored Base, and a premeasured Tint Cup of the selected coloring agent).



Tintura is formulated specifically to stain concrete or cementitious toppings. Unlike coatings or paints which often delaminate when used on concrete, Tintura chemically bonds with cured concrete that is uncolored, color hardened, or integrally colored. It is also compatible for use with cementitious toppings.



Either a translucent or an opaque appearance can be achieved with this proprietary system. Up to three coats may be applied to increase color intensity. The final installed appearance will be unique depending on the color consistency, condition and porosity of the substrate and the cement and aggregates used.



Sustainability

LITHOCHROME Tintura is a low VOC, nonacidic, waterborne, environmentally sound green building material. It may contribute to earning LEED credits for Indoor Environmental Quality, 4.2 Low Emitting Materials, Paints & Coatings based on low contribution of VOC.



Documents

Contractor Sheet PDF

Technical Data Bulletin

MSDS

Shipping Information:

Usually ships within 2-5 business days.



Color Chart:






Custom-matched colors are also available.



Examples shown represent three coats of LITHOCHROME® Tintura™ water-based stain applied over uncolored, medium gray concrete, then sealed with two coats of SCOFIELD® Selectseal-W™. The concrete color effects produced may differ significantly from that shown on the color chart. A representative test section should be prepared for each individual concrete surface prior to general application.



Please note: concrete colors shown are approximate. Due to shade variations associated with individual color monitors and printers, for a more precise representation, we suggest requesting an actual Lithochrome Tintura Stain Color Chart by calling Scofield at 1-800-800-9900. We strongly recommend that a test slab be poured and approved prior to starting the job. Test slabs should be poured replicating jobsite conditions.

Concrete Sample Making Mold

Product Detail:

Re-usable, flexible sample making mold to quickly and easily create 5" square samples of concrete.

Flexible, yet still rigid enough to support casting.

Made of extremely durable polyurethane that can flex and stay strong.

Good for hundreds of uses- Actually gets better with each use as the mold will season.

Product Specifications:

Measurements: Each mold makes 4 square of concrete, measuring 5" x 5" and 1/2" thick.

Mold Care:

Clean with a stiff brush and water after each use. Any hardened concrete can usually be removed using a wire brush.

*Occasional imperfections may be present on the Rubber Material, and can be altered using a sharp utility knife, or a very abrasive sand paper or resin-bound grinding discs.

Shipping Information:

Usually ships within 2 business days.

Concrete Tamper Tool

Product Detail:

Concrete Tamper Tool.

Used to press stamps into concrete surface.

Strong, heavy rubber base.

Won't ruin your stamps over time like metal tamper tools will.

Available in a large 4 foot size, or small Hand Tamper size.

Product Specifications:

Large Tamper Dimensions: 10"L x 10"W x 48" H. Oak Handle.

Hand Tamper Dimensions: 6"L x 6"W x 1.5" Thick. Short wooden handle.

Shipping Information:

This product usually ships within 1-2 business days.

Sample Pictures:


Above: Hand impact stamping tool.



Above: Large impact stamping tool with 48" oak handle.

Stencil Pattern

Product Detail:

Stencil Pattern - Rustic Ashlar Style

Paper Stencils, designed for one-time use

Used to Make Decorative Borders, Corner Accents, Company Logos, Family Crests, Monograms, and more

Use Pattern Tape (sold separately here) to Touch up Areas, Create Own Stencil Patterns or Logos

Product Specifications:

Largest Stone Size: 12" x 10"

Roll Width: 35"

Joint Width: 1/2" - 1"

Paper Stencils Available in Half-Box (500 sq ft.) or Full-Box (1000 sq ft.)

*NOTE: Pattern measurements may vary slightly due to normal manufacturing tolerances.

Stencil Application:

Stencils are Designed for Professional Use

Tips for Use: Lay the stencil down on the concrete surface for typical application. Any spots where stencil may bubble can be touched up using pattern tape of the same joint width. Spray an acrylic overlay (sold separately here) straight down, not at an angle. Alternate methods are to use dry powder release (sold here), trowel or stamp the surface with color hardener (sold here), or even use acid stains (sold here). Peel stencil pattern away when finished.

Watch a brief tutorial here:

Shipping Information:

Usually ships within 2 business days, via UPS only

Sample Photos:



This pictures displays the use of the Compass, Cobble Fan, and Brushrock Header stencils.



This pictures displays the use of the Running Bond, and Brick Header stencils.



This pictures displays the use of the Large Tile, and Herringbone Header stencils.

Concrete Table Vibrator, Electric

Product Detail:

High frequency electric vibrator, specially designed for concrete countertop casting tables.

Use when precasting concrete to get a smoother finish, greater density, and faster pouring.

Vibrator only. Optional Mounting Plate can be added for $90 and a Speed Controller can be added for $140.

*TIP: When using a vibrator unit, it will be directional- meaning one unit mounted to one end of a table will 'pull' the concrete in that direction. For best results, use two vibrator units at opposite ends of the table, one mounted 180 degrees (opposite operating direction) from the other, which will cancel each other's 'pull' and will create a lateral, or up-and-down vibration, which is ideal for concrete.

115 volt, single phase motor plugs into any standard outlet or generator.

Low amperage draw (3 amps max)

Speed and force (frequency) are adjustable with optional Speed Control Unit, to adapt to different size projects. Speed Controller has on/off switch, and overload protection to protect vibrator from overloading. Maximized capability of the vibrator, and minimizes the risk of overload damage. Speed Control Unit can be used with up to 3 of the electric vibrator units (Use a 2 or 3-way electrical splitter to plug the additional vibrator units to the speed controller).

Optional table adapter bracket mounting plate available. Designed specifically for concrete countertop applications. Mounting bracket makes entire vibrator assembly easily portable with two lifting handles, and can be mounted to table either on top, or underneath.

Quite operation: 80 dB.

Product Specifications:

Dimensions: Vibrator Unit: 6 3/4" L x 6" W x 4 1/4" H. Mounting Plate: Approximately 12" H x 12" W, and 1/4" Thick.

Electric High Frequency US-450TAL Vibrator: Solid cast aluminum body. For up to 400 lbs of concrete + form/mold. Produces 9000 VPM, 450 lbs of force. Noise: 80 dB. Weight: 13 lbs. Volts: 115 AC, uses 3 Amps.

Shipping Information:

This product usually ships within 2 business days.

Ships via UPS. Please make sure your Ship-To address is not a PO Box for this item.

Sample Videos:


Sample Images:

Vibco Pneumatic Ball Vibrator

Product Detail:

High frequency pneumatic ball vibrator unit.

Great for precast concrete, countertops, and molds.

Ball Vibrator can be mounted in any position. Mounting brackets for this unit are sold separately here.

Mount multiple units to a casting table, or secure Vibrators to the outside of form work and molds.

*TIP: When using a vibrator unit, it will be directional- meaning one unit mounted to one end of a table will 'pull' the concrete in that direction. For best results, use two vibrator units at opposite ends of the table, one mounted 180 degrees (opposite operating direction) from the other, which will cancel each other's 'pull' and will create a lateral, or up-and-down vibration, which is ideal for concrete.

How it works: Compressed air drives a highly chrome finished and hardened steel ball at a high speed around a hardened and highly ground and polished ball race, creating high frequency vibration.

Made in the USA. High quality, uniformity, and long life.

Product Specifications:

NOTE: Pneumatic ball vibrators require continuous lubrication. Optional accessories for this unit include: An Inline Lubricator, NPT Pressure Regulator, and an Exhaust Muffler.

Pneumatic Ball Vibrator V-250: For up to 250 lbs of concrete + form/mold. Thread Diameter: 1/4". Produces 1100 VPM, 380 lbs. or force @ 80 psi & 13 cfm.

Pneumatic Ball Vibrator V-320: For up to 500 lbs of concrete + form/mold. Thread Diameter: 3/8". Produces 10000 VPM, 650 lbs. of force @ 80 psi & 17 cfm.

See spec sheet below for more info on the V-320.

Shipping Information:

This product usually ships within 2 business days.

Ships via UPS. Please make sure your Ship-To address is not a PO Box for this item.

Sample Images:



border="0" cellpadding="0" cellspacing="0" width="100%">

Vibco Vibrating Beam, Portable

Product Detail:

High frequency pneumatic or electric vibrator unit, mounted to an aluminum beam.

Low cost alternative to a vibrating table. Great for precast concrete, countertops, and molds.

Beam can be mounted to any standard sawhorse, table, board, etc.

Incredibly portable, lightweight and small.

*TIP: When using a vibrator unit, it will be directional- meaning one vibration unit alone will 'pull' the concrete in that direction. For best results, use two vibrator units at opposite ends of the piece being vibrated, one mounted 180 degrees (opposite operating direction) from the other, which will cancel each other's 'pull' and will create a lateral, or up-and-down vibration, which is ideal for concrete.

How it works (pneumatic): Compressed air drives a highly chrome finished and hardened steel ball at a high speed around a hardened and highly ground and polished ball race, creating high frequency vibration.

Made in the USA. High quality, uniformity, and long life.

Product Specifications:

Beam Dimensions: 6" High, 4" Wide, Available lengths- 36", 42" or 46".

NOTE: Pneumatic ball vibrators require continuous lubrication. See accessories: Inline Lubricator, NPT Pressure Regulator, Exhaust Muffler.

Pneumatic Ball Vibrator V-250: For up to 250 lbs of concrete + form/mold. Thread Diameter: 1/4". Produces 1100 VPM, 380 lbs. or force @ 80 psi & 13 cfm.

Pneumatic Ball Vibrator V-320: For up to 500 lbs of concrete + form/mold. Thread Diameter: 3/8". Produces 10000 VPM, 650 lbs. of force @ 80 psi & 17 cfm.

Electric High Frequency US-450T Vibrator: For up to 400 lbs of concrete + form/mold. Produces 9000 VPM, 450 lbs of force.

Shipping Information:

This product usually ships within 2 business days.

Ships via UPS. Please make sure your Ship-To address is not a PO Box for this item.

Sample Images:

Stainless Steel Yin-Yang Doorbell

Product Details:

Solid stainless steel, 3/16" thick, with a brushed finish.

Illuminated LED push buttons less than 1 watt, and last approx. 11 years.

LED buttons available in Ring-Light, or DOT style. Ring Light: A bright glow ring around a stainless steel center. DOT Light:Very bright center LED glow.

Push Buttons available in 3 voltages: 12V (8-12 Volts AC) or 16V (12-16 Volts AC) or 24V (12-24 Volts AC). Match to your doorbell/doorchime transformer output, or use a voltage tester on your existing wires to determine voltage

Exceeding the button's voltage can prematurely burn out the LED in the button. If unsure, and unable to determine, we recommend ordering the 24V button to prevent the LED from premature burnout.

Doorbell Buttons are theft-resistant. Each button is secured on the back of the doorbell cover by a hex-nut.

Will work with new or existing doorbell systems, and can replace most garage door opener buttons.

Doorbell Only. Door chimes, power transformers, and wire sold separately.

Additional LED colors and Voltages are available for large quantity special orders.

Product Specifications:

Doorbell Cover Measurements: 3" Diameter x 3/16"D.

Push Button Measurements: 11/16"W x 5/8" Thread Diameter x 1 3/4"L.

Installation Instructions: Drill 3/4" (20mm) hole approximately 1 1/2" deep. Attach one wire to each screw terminal. Use the screws provided to mount the door bell in place.

Optional Tamper Resistant screws come with a special driver bit for installation/removal.

Shipping Information:

Product usually ships in 1-2 business days.

Warranty Information: One year manufacturer warranty against defect.

Sample Photos:


Back side of a stainless steel doorbell, and optional Security Screws with Driver Bit (vandal and theft resistant).

Concrete Vessel Sink, Bowl

Product Detail:

Concrete Round Bowl Vessel Sink.

Made using our TC-23 Vessel Sink Bowl Mold.

Vessel sinks can be used as a stand alone sink, sit on top of a counter, or sit partially recessed into a countertop.

Available in raw, natural gray cement (unsealed, so you can color, stain, and seal the sink on your own), or finished in your choice of our Acid Stained Finishes, and sealed with our Satin Sealer.

Save $ by ordering the raw concrete sink, and then ordering a 4oz sample of Acid Stain, and a 16oz Satin Sealer, and finish the sink yourself. Acid staining can be very artistic, so you can personalize your sink this way.

About Acid Stain Colors: Ebony- Almost Black. Walnut- Rich Black with Brown Undertone. Mahagony- Deep Rust, Terra Cotta. Coffee- Medium Brown with a Slight Red Hue. Mission Brown- Rich, Medium Rusty Brown. Weathered Terracotta- Red/Orange Terra Cotta. Caramel- Light, Yellowish Brown. Amber- Slightly more Orange than Caramel. Olive- Mossy Green. Jade- Deep Green. Turquoise- Lighter Green.

Please note- the acid stain colors with greenish hues may discolor/darken over time when exposed to water repeatedly, such as a sink would.

Product Specifications:

Measurements: 18.5" total width. 6.5" High.

Sink Weight: 38 lbs.





Shipping Information:

Not all finishes are always in stock. In-stock finishes ship within 2 business days. Finishes not in stock can take up to 3 weeks to ship.

Ships via UPS only.

Above: Raw concrete sink bowl.




Above: Vessel Bowl, finished in Weathered Terracotta Acid Stain, and partially recessed into countertop.




Above: The Concrete Vessel Bowl with polished rim to expose aggregate, and then acid stained in Walnut.




Above: The Concrete Vessel Bowl with polished rim to expose aggregate, and then acid stained in Walnut.

Concrete Edge - Contractor 10-Pack

Product Detail:

10-Pack of re-usable edge form liners to create a detailed edge on concrete.

Select which form liners from the drop down menus above.

Please refer to the individual Edge Form Liners description page(s) for information and pictures.

Made of extremely durable polyurethane that can flex and stay strong.

Can be used in pre-cast or poured in place concrete work.

Cut to length easily with a utility knife. Join cut pieces using silicone.

Fast and easy to place in a mold, and quick to clean after use.

Good for hundreds of uses- Actually gets better with each use.

This product is not eligible for any other store promotional offers.

Product Specifications:

Measurements: 1.5"H and 2"H. Lengths vary per liner design, but are approx. 8' long.

Mold Setup:

Place Edge Form Liners in mold and either silicone in place, or screw through a backing form into the Edge Form Liner (screw holes will disappear once you back the screws out).

Silicone a bead across the full length of the bottom of the Edge Form Liner to create a water-tight seal.

Use of form release is recommended, but usually not necessary. Form release generally will create a smoother finish on the concrete.

Vibrate concrete well, or use fingers along entire length of Form Liner to remove as many air pocket voids as possible.

Edge Liner Removal:

After the concrete is sufficiently set up (typically 2-3 days), remove the Edge Form Liner.

Removal is simple- start on one end, and slowly peel the Form Liner away from the concrete.

Concrete usually will have small 'bumps' which can be sanded off with a 200 grit sandpaper. These bumps tend to disappear the more the Edge Form Liner is used, as it becomes seasoned.

Fill any air pocket voids with a slurry mix. Cenospheres (sold separately) make slurry fill voids more easily, and with less shrinkage.

Edge Liner Care:

Clean with a stiff brush and water after each use. Any silicone left on the forms should be peeled or scraped off (the sooner the easier to remove). Any hardened concrete can usually be removed using a wire brush.

*Occasional imperfections may be present on the Edge Form Liners, and can be altered using a sharp utility knife, or a very abrasive sand paper or resin-bound grinding discs.

Shipping Information:

Usually ships within 1-2 business days.

Sample Photos:


Above: The 2" Slate Edge Form Liner is pictured.



Above: The 1.5" Rough Rock Edge Form Liner.

Fiberglass & Rubber Safe Form Release

Product Detail:

NEW FORMULA! Fiberglass & Rubber safe form release.

Won't harm fiberglass gelcoat, or dry out rubber molds.

This release was specially formulated for releasing fiberglass and rubber molds from concrete.

Ideal for use with fiberglass molds used for casting concrete sinks, drainboards, etc.

Allows concrete to release off of fiberglass molds when cured. (Most fiberglass molds should be waxed with Mold Wax prior to applying form release to ensure a clean release from the concrete).

Contains no diesel, kerosene, waxes or silicones.

Aids in the reduction of air pocket voids in concrete.

Product Specifications:

Available in 4 oz. or 8 oz. bottles.

Coverage: One teaspoon of release will treat a normal bathroom sized sink mold (about 3 square feet of fiberglass surface).

Application: Apply with a clean cloth or paper towel to a mold or edge liner (Fiberglass molds should be waxed first using Fiberglass Mold Release Wax (sold here) .

Release can be applied anytime prior to pouring concrete on the mold.

Re-apply release if more than 24 hours have passed from when it was applied, and concrete is ready to be poured.

This release does leave some residue on the concrete, which is removed after casting by lightly scrub/wash the concrete a few times with a warm water and a few drops of dish soap to remove the release residue.

Shipping Information:

Usually ships within 2 business days.

Faucet Hole Knockout

Product Details:

Re-usable Polyurethane Faucet Hole Knockouts.

Easily create uniform holes in concrete countertops for faucets, soap dispensers, valves, etc.

Large sizes (1.5" hole size) can also be used to make small bathroom lavatory size drain holes when casting a concrete sink.

Sold individually or in a 3-pack.

Larger diameter hole on under side of the concrete countertop is to allow room for mounting bracket and nut to secure faucet (most faucets and drains aren't designed for thick concrete countertops and sinks).

Square size is designed for faucets that come with a square-shaped mounting bracket (shown below).

Slightly angled sides to allow for easy removal from concrete.

Made of extremely durable Polyurethane. Good for hundreds of uses.

Two sizes available: 1 1/4" and 1 1/2" Diameter hole size (When looking at the top of a finished countertop).

Product Specifications:

Measurements:

--Small: 1 1/4" Diameter Hole x 2 1/2" Diameter (Mounting Hardware Area) x 2" High.
--Large: 1 1/2" Diameter Hole x 2 3/4" Diameter (Mounting Hardware Area) x 2" High.
--Square: 1 1/2" Diameter Hole x 2 3/4" Square (Mounting Hardware Area) x 2" High.

To Use- Secure Knockout in place with a little silicone. You may also drill a small hole through the center of the Knockout, and use a washer and 2 1/2" long screw to secure to the form.

Removal- Prior to flipping over your concrete, loosen the edges of the Knockout with a flat head screw driver. Once the concrete piece is turned over, you should be able to push the Knockout free with your thumb and very little pressure.

To Clean- Scrape off any hardened concrete and/or silicone.

Shipping Information:

Product usually ships in 1-2 business days.

Sample Photos:












Above: Square size Faucet Plugs, with a square mounting bracket shown (some faucets come with this style).




Above: Sample of 3 faucet holes made in a concrete countertop.

Personalized Premium Mailbox

Product Features:

Post Mounted Mailbox.

20% Larger than most premium mailboxes.

Optional personalized sides, door and topper makes each mailbox unique.

Transportable! Can easily be relocated and re-personalized.

All components are manufactured from die cast rust free aluminum.

Weather resistant powder coat paint finish.

Mounting and hinge hardware is protected from the weather.

Independently tested for function and durability.

Benefits

Offers homeowners choices in price and personalization.

Easy and durable door operation.

Designed and built to last a lifetime.

Holds multiple days' worth of mail and larger packages.

Magazines will lay flat, eliminating tears and creases.

Makes a great first impressions, enhancing the curb appeal of the home.

Personalized for the individual homeowner.

Mailbox Packages:

Premium: Includes Mailbox, Standard Post, and 2 Personalized Sides.

Superior: Includes Mailbox, Superior Post with Cap, Decorative Brackets, and 2 Personalized Sides.

Ultimate: Includes Mailbox, Deluxe Post with Finial, Decorative Brackets, 2 Personalized Sides, Personalized Door, Personalized Topper, and Newspaper Box.

Personalized Pieces:

Side Panels:
-One Line Version: Can hold up to five 4.5" tall numbers.
-Two Line Version: Line 1 - Holds up to five 3" tall address numbers. Line 2 - Holds up to sixteen 1.25" tall characters.

Door: Holds up to five 1.75" tall address numbers.

Topper: Holds up to sixteen 1.25" tall characters.

Product Specifications:

Mailbox: 13" Wide, 9.625" Tall, 20.375" Long.

Premium Post: 4" x 4", 40" Long.

Superior & Ultimate Post: 4" x 4", 54" Long, 16" Arm.

Locking Mailbox Insert: 8.75" Wide, 6" Tall, 18.5" Long.

Shipping Information:

This product usually ships within 2-3 weeks of ordering, and ships via UPS ground.

Shipping is provided for the 48 US States only. Outside areas (Alaska & Hawaii) contact us for shipping.

Sample Photos:

Solid Brass Large Quail Faucet

Product Detail:

Solid Brass Faucet.

Finished with a Verdigris patina (blue/grey color), with the Accent Piece being polished to create a beautiful contrast with the unpolished recesses.

Faucet is made of the highest quality components.

Handles are permanently attached to the hose bib by pinning the handle to the stem of the faucet with a solid brass pin.

The small black gland in the packing nut is a vitally important part of every faucet. It is made of a specialized graphite and cotton material with a genuine rubber binder. The brass stem is machined so the packing sits like a shallow cone, ensuring the shut-off seal tight and secure.

Product Specifications:

Threaded for standard 3/4" garden hoses.

Shipping Information:

This product is made-to-order, and takes a few weeks to ship.

Usually ships within 3-4 weeks.

Ships via UPS only. Please make sure your shipping address is not a PO Box for this item.

Sample Photos:


Photo shows Verdigris finish on this Dragonfly Faucet.

Concrete Edge 2" Ivy Vines

Product Detail:

Re-usable edge form liner to create a detailed Ivy edge on concrete.

The edge form creates a raised center section along the countertop edge. Ivy Detail runs the length of this center strip.

Made of extremely durable polyurethane that can flex and stay strong.

Can be used in pre-cast or poured in place concrete work.

Cut to length easily with a utility knife. Join cut pieces using silicone.

Fast and easy to place in a mold, and quick to clean after use.

Good for hundreds of uses- Actually gets better with each use.

Product Specifications:

Measurements: 95 3/4"L x 2"H.

Mold Setup:

Place in mold and either silicone in place, or screw through a backing form into the Edge Form Liner (screw holes will disappear once you back the screws out).

Silicone a bead across the full length of the bottom of the Edge Form Liner to create a water-tight seal.

Use of form release is recommended, but usually not necessary. Form release generally will create a smoother finish on the concrete.

Vibrate concrete well, or use fingers along entire length of Form Liner to remove as many air pocket voids as possible.

Edge Liner Removal:

After the concrete is sufficiently set up (typically 2-3 days), remove the Edge Form Liner.

Removal is simple- start on one end, and slowly peel the Form Liner away from the concrete.

Concrete usually will have small 'bumps' which can be sanded off with a 200 grit sandpaper. These bumps tend to disappear the more the Edge Form Liner is used, as it becomes seasoned.

Fill any air pocket voids with a slurry mix. Cenospheres (sold separately) make slurry fill voids more easily, and with less shrinkage.

Edge Liner Care:

Clean with a stiff brush and water after each use. Any silicone left on the forms should be peeled or scraped off (the sooner the easier to remove). Any hardened concrete can usually be removed using a wire brush.

*Occasional imperfections may be present on the Edge Form Liners, and can be altered using a sharp utility knife, or a very abrasive sand paper or resin-bound grinding discs.

Shipping Information:

Usually ships within 2 business days.

Sample Photos: