Product Detail: - "No Solicitors" plaque, forged from solid Aluminum.
- Oval design, in a 'Pewter' Finish.
- High quality sign that will actually increase curb appeal, rather than detract from it as most 'No Soliciting' signs do.
- Designed to be mounted without any visible screws.
- Secure in place by using double-sided tape or silicone.
- Back of the plaque is drilled and 2 threaded bolts are included with each plaque.
Application:
- Standard Install: Drill 2 holes in your wall, brick, stone, etc. Attach the included bolts to the back of the No Solicitors Plaque. Fill the 2 holes in your wall with silicone, and then insert the Plaque. A little extra silicone on the back of the Plaque will ensure a good secure placement.
Product Specifications: - Rectangle Plaque Dimensions: 4 1/8" Wide, 2 1/8" High, 1/4" Thickness.
- Threaded Bolt Diameter: 3/16" (size to drill the holes)
- Spacing between threaded bolts: 3" (distance between drilled holes)
- Each Plaque includes brass mounting hardware: (2) Threaded Bolts, (2) Washers, (2) Nuts.
Concrete Bench Top, the Symphony.- Bench Top Only. Bench Legs are sold individually, so need to be
ordered separately and allow complete customization of your bench style
and coloring.
Made of high strength concrete, reinforced with chopped AR glass fibers.
Unlike the majority of concrete benches out there who use cheap sand
only mixes, or use left over concrete from other projects that they
weaken when they have to re-hydrate to fill the bench molds... we make
our pieces from a specific concrete formula with over 6,000 PSI, for the
longest durability and strength possible.
Available in natural grey concrete, colored concrete, acid stained, and an option for sealing the concrete.
Product Specifications:
- Measurements: 40.5" Long, 15.5" Wide, 2.5" Thick.
- Weight: 98 lbs.
- Color: Using the drop down menu above, select the color desired. DIY project enthusiasts may want to consider ordering acid stain and sealer separately, and finishing their own project.
Note about acid stain colors: Olive, Turquoise, and Jade colors may darken or discolor in outdoor, wet environments.
- Sealer: If desired, the concrete can be sealed. We offer SuperSeal
2000 acrylic sealer, which is available in either Gloss or Matte finishes, and protects the
concrete and enhances the color. We also offer the option of sealing the concrete piece with a natural (invisible) stone sealer that will protect against the elements, but not alter the color or the finish of the natural concrete.
Expressions LTD is a full line distributor for Flex Products, the Industry leader for polishing equipment. View the full catalog HERE, or visit www.FlexNorthAmerica.com for more information. Please contact us about ordering any Flex Products not currently on our website. The Flex Orbital Buffing Polisher is the best choice for a
professional quality wax finish on any concrete, stone, or automotive
body surface.The orbital rotation of this innovative polisher simulates the
circular movement of the human hand while polishing. At the same time,
the polisher's highly smooth running facilitates a careful, precise
finish and even offers what is necessary for hologram-free polishing.
That's just what this polisher, with its ergonomically designed knob
handle, was made for.The positive drive ensures a uniform movement, even under load, thanks to constant lift.Taken in conjunction with the large stroke length there is also
the possibility of removing existing holograms from black finishes.
Thanks to the direct orbital drive, very little heat develops on the
surface, which is ideally suited to temperature-sensitive finishes.The accelerator trigger switch and speed selection allow for a
controlled acceleration to the optimal speed. Note: the machine's
orbital movement has been optimally adapted for the special backer pad
included with it.FLEX seven-fold microprocessor electronics: with consistent speed
control by tachometer generator, soft start, accelerator trigger switch,
restart protection after power interruption, overload protection,
temperature monitoring, and speed selection.8 mm orbital movement. Permanent direct drive for an even polished surface.Removable, ergonomic knob grip.High-powered motor: can handle extreme loads.Spindle lock for easy backer swapping.Quality shut-off carbon brushes: if the carbon brushes wear down,
the motor will be automatically switched off and thus protected from
damage.Nice long 10' power cord length.
Urethane coated quartz sand.For use with Epoxy floor coatings.Semi-angular quartz sand, coated with pigmented urethane.Brightens or soften the environment by controlling the color and texture of the floor.Quartz Sand blends colors have a minimum order size of 8 bags per blend color.Specifications:- Packaging: 50 lb. bags. Minimum order: 8 bags per colored blend.
- Coverage: 50 lbs. of Urethane Coated Quartz Sand will cover about 65 square feet, at a Double Broadcast* rate. A light broadcast can treat up to 100 sq. ft. per 50 lb. bag of sand.
- *Double Broadcast: Quartz Sand is broadcast onto the wet epoxy, allowed to dry, another coating of epoxy put out, and then a lighter coating of the Quartz Sand broadcast again, followed by the final epoxy or urethane Top Coat.
Application Instructions:
- Apply a Base Coat layer of epoxy, such as SHIELD 50 at about 8 mils thick.
- While
Base Coat is still wet, broadcast the Urethane Coated Quartz Sand onto
the Base Coat. (Use of Spiked Shoes will allow easier access to all
areas of the floor).
- Broadcasting can be done in a as thin or thick as desired. Images of blended colors are from a 'Double Broadcast' application:
- Double
Broadcast: Apply Epoxy Base Coat, broadcast the Quartz Sand, let dry
and then apply another light coat of Epoxy, and another broadcast of
Quartz Sand.
- When dry, clean the floor with broom/shop vac
of all loose sand, and then apply the Top Coat, such as UV Shield Epoxy,
or SuperGlaze 3600 Polyurethane.
Color Chart: Blends shown are Double Broadcast
Solid Brass Faucet.Faucet is made of the highest quality components.Handles are permanently attached to the hose bib by pinning the handle to the stem of the faucet with a solid brass pin.The small black gland in the packing nut is a vitally important part of every faucet. It is made of a specialized graphite and cotton material with a genuine rubber binder. The brass stem is machined so the packing sits like a shallow cone, ensuring the shut-off seal tight and secure.Threaded for standard 3/4" garden hoses.
Re-usable, flexible sample making mold to quickly and easily create samples of concrete.New large 12"x12" size. (Actual size is 11 7/8" x 11 7/8" x 11/16" Thick)Can also be used to make actual concrete tiles for flooring, backsplashes, decorative hot plate for hot cooking dishes, etc.
Flexible, yet still rigid enough to support casting.Made of extremely durable polyurethane that can flex and stay strong.Good for hundreds of uses- Actually gets better with each use as the mold will season.
Product Specifications:- Measurements:
- Creates Concrete Piece at 11 7/8" x 11 7/8" Square, with 11/16" Thickness.
Mold Setup:
- While not usually an absolute necessity, use of release on the rubber Mold is recommended.
- Apply a release agent that is safe for rubber (sold here) just prior to casting the concrete.
-
The Sample Maker Molds are designed to simply be filled with concrete.
- Vibrate the Sample Maker and concrete to remove air pockets.
Mold Removal:
-
Cured concrete samples should easily remove from the rubber Molds.
-
Any small bumps in the concrete can be lightly removed with 400 grit sandpaper or a Diamond Sanding Block.
Mold Care:
- Most rubber products season
from use with concrete, as the cement will fill small air holes in the
rubber. Keep that in mind when cleaning the mold, as it may perform
better left with some cement residue filling the imperfections in the
rubber.
- Clean rubber Mold with a sponge or stiff brush after each use.
-
Dried concrete can be removed by carefully scraping with a putty knife or wire brush.
- Difficult to clean molds can be scrubbed with a light muriatic acid wash (20 parts water to 1 part muriatic acid).
-
Keep Rubber Molds out of direct sunlight to prolong their life.
-
Re-apply release prior to each use.
|
|
 |
 |
|
 |
|
Expressions LTD is a full line distributor for Flex Products, the Industry leader for polishing equipment. View the full catalog HERE, or visit www.FlexNorthAmerica.com for more information. Please contact us about ordering any Flex Products not currently on our website. - The L 12-3 100 Wet Polisher is the new model for the old LW 1503 Polisher:
- New Water Feed - water feed and flow control are fitted under the motor housing.
- New Water Connection - brass connection is at the end of a flexible 6-1/2 foot hose.
- New Electronics - with soft start, overload protection.
- The L 12-3 100 Wet is the most demanded wet polisher in the industry. It is a compact, but powerful workhorse. Due to its light weight and portability, this product has become the "de facto" standard for all WET polishers.
- Single Speed Polisher.
- Brass quick fit connector for easy connection to a
1/2" water hose.
- Extra powerful 9.3 amp motor with high torque for professional use.
- Three jet nozzle water spray can be removed to give one
central waterjet.
- Ergonomic shaped grip for safe handling.
- Dust protected switch increases functional reliability and longevity
-
GFCI - Cable safety switch is integrated in the cable for safe working
-
Bail handle for a firm grip even when working vertically
- Powder coated magnetic field protects against abrasive dust and rust
|
