 |
Colorado Flagstone Concrete Stamp MatAchieve the look of Colorado FlagstoneGrout lines are 1/2" Deep24" X 59 1/2" Mat
Re-usable Edge Form Liner to create a detailed edge on concrete."Chiseled Granite Rough Rock" edge detail, 3" tall. Very similar to our 3" Rough Rock edge face, with a slight difference in the center of the form liner where it forms more of a point- The edge of the finished concrete has more of the appearance that the 'Rock' edge was chipped out from above and below, creating a horizontal ridge running in the middle of the edge.Create a rock edge on concrete countertops, pools, steps, etc.Made of extremely durable polyurethane that can flex and stay strong.Can be used in pre-cast or poured in place concrete work.Cut to length easily with a utility knife or chop saw. Join cut pieces using silicone.Fast and easy to place in a mold, and quick to clean after use.Good for hundreds of uses- Actually gets better with each use as they 'season'.
Available LED button colors: Amber, Red, Blue, Green, and White.Small 1 7/8" doorbell diameter.Made of soft-to-the-touch polymer resin, and satin finished anodized aluminum.The soft touch poly-resin goes under the anodized aluminum faceplate and around the edges, creating a glowing side-wash.LED color is very vibrant and efficient, using less that one watt, and will last approximately 11 years.
Solid stainless steel doorbell cover plate, 3/16" thick, with a brushed finish."Shark" design, leaping right out of the sea, teeth bared! Illuminated LED push buttons less than 1 watt, and last approx. 11 years.LED buttons available in Ring-Light, or DOT style. Ring Light: A bright glow ring around a stainless steel center. DOT Light:Very bright center LED glow.Doorbell Buttons are theft-resistant. Each button is secured on the back of the doorbell cover by a hex-nut.Will work with new or existing doorbell systems, and can replace most garage door opener buttons.Doorbell Only. Door chimes, power transformers, and wire sold separately.One year manufacturer warranty against defect.
A liquid release for stamping tools and decorative concrete.Clear Bond-Breaker, designed to prevent stamping tools from sticking to the concrete.Unique blend of ingredients leaves no residue of any kind. Looks, feels and smells just like the reliable old bubble gum release, but the difference will be obvious to the trained professional.Interior/Exterior use. Will extend tool/stamp life.Liquid release is an alternative to dry powdered release, and designed to be used when a mottled, antiqued appearance is not desired.
Rock N Roller™ Texture Roller - Heavy Slate 9"Used to apply texture next to buildings or areas outside the reach of the framed rollersEasy push and pull imprintFive times faster than traditional stamping methodsNo special setup for bordersUltra lightweightMade in the USA
|