Eagle Doorbell, Pewter Finish

Product Detail:

Doorbell Button and Accent mounted on a natural stone piece.

Button illuminates in a warm amber color for nighttime visibility.

Each stone piece is unique and will vary slightly in appearance.

Doorbell is for use with wired, non-battery operated doorbell systems only.

This is a doorbell only- Chimes, Transformers and Wire are sold separately.

This doorbell can also be used to replace most garage door buttons.

Each doorbell is custom-made to order, so is non-refundable.

Product Specifications:

Available Stone sizes: 4"L x 4"W, 5.25" Tip to Tip. Narrow Travertine- 2"W x 4"H. Narrow Green Slate- 3"W x 6"H.

This doorbell requires a small hole approx 3/4" wide by 1/2" deep behind the doorbell for the back of the button to fit into.

Mounting adhesive included for simple installation to any surface.

Shipping Information:

This product usually ships within 2 business days.

Ships via UPS. Please make sure your Ship-To address is not a PO Box for this item.

18" QLT Notched Squeegee, 1/8"

Product Detail:

18" Notched Squeegee used to meter materials for epoxy floors.

Consistently accurate notched for better material management.

1/8" Notch size (spreads coatings out at 1/8" thickness).

Squeegee size: 18" wide.

Use with a wooden handle (not included).

Made in the USA by Marshalltown, the premier manufacturer of concrete tools.

Shipping Information:

Usually ships within 1-2 business days.

Stainless Steel Call Button Gangbox Doorbell

Product Details:

Solid stainless steel, 3/16" thick, with a brushed finish.

This particular doorbell cover's large size is designed to fit over a standard electrical gang-box. Screw hole distance is 3 1/4" apart.

"CALL BUTTON" text is cut out of this doorbell plate.

Illuminated LED push buttons less than 1 watt, and last approx. 11 years.

LED buttons available in Ring-Light, or DOT style. Ring Light: A bright glow ring around a stainless steel center. DOT Light:Very bright center LED glow.

Push Buttons available in 3 voltages: 12V (8-12 Volts AC) or 16V (12-16 Volts AC) or 24V (12-24 Volts AC). Match to your doorbell/doorchime transformer output, or use a voltage tester on your existing wires to determine voltage

Exceeding the button's voltage can prematurely burn out the LED in the button. If unsure, and unable to determine, we recommend ordering the 24V button to prevent the LED from premature burnout.

Doorbell Buttons are theft-resistant. Each button is secured on the back of the doorbell cover by a hex-nut.

Will work with new or existing doorbell systems, and can replace most garage door opener buttons.

Doorbell Only. Door chimes, power transformers, and wire sold separately.

Additional LED colors and Voltages are available for large quantity special orders.

Product Specifications:

Doorbell Cover Measurements: 2 13/16"W x 4 7/16"H x 3/16"D.

Push Button Measurements: 11/16"W x 5/8" Thread Diameter x 1 3/4"L.

Installation Instructions: Drill 3/4" (20mm) hole approximately 1 1/2" deep. Attach one wire to each screw terminal. Use the screws provided to mount the door bell in place.

Optional Tamper Resistant screws come with a special driver bit for installation/removal.

Shipping Information:

Product usually ships in 1-2 business days.

Warranty Information: One year manufacturer warranty against defect.




Sample Photos:









Back side of a stainless steel doorbell, and optional Security Screws with Driver Bit (vandal and theft resistant).

Concrete Edge 2" Grande OG

Product Detail:

Re-usable edge form liner to create a detailed edge on concrete.

"Grande OG" edge detail.

Made of extremely durable polyurethane that can flex and stay strong.

Can be used in pre-cast or poured in place concrete work.

Cut to length easily with a utility knife. Join cut pieces using silicone.

Fast and easy to place in a mold, and quick to clean after use.

Good for hundreds of uses- Actually gets better with each use.

Product Specifications:

Measurements: 95"L x 2"H.

Mold Setup:

Place in mold and either silicone in place, or screw through a backing form into the Edge Form Liner (screw holes will disappear once you back the screws out).

Silicone a bead across the full length of the bottom of the Edge Form Liner to create a water-tight seal.

Use of form release is recommended, but usually not necessary. Form release generally will create a smoother finish on the concrete.

Vibrate concrete well, or use fingers along entire length of Form Liner to remove as many air pocket voids as possible.

Edge Liner Removal:

After the concrete is sufficiently set up (typically 2-3 days), remove the Edge Form Liner.

Removal is simple- start on one end, and slowly peel the Form Liner away from the concrete.

Concrete usually will have small 'bumps' which can be sanded off with a 200 grit sandpaper. These bumps tend to disappear the more the Edge Form Liner is used, as it becomes seasoned.

Fill any air pocket voids with a slurry mix. Cenospheres (sold separately here) make slurry fill voids more easily, and with less shrinkage.

Edge Liner Care:

Clean with a stiff brush and water after each use. Any silicone left on the forms should be peeled or scraped off (the sooner the easier to remove). Any hardened concrete can usually be removed using a wire brush.

*Occasional imperfections may be present on the Edge Form Liners, and can be altered using a sharp utility knife, or a very abrasive sand paper or resin-bound grinding discs.

Shipping Information:

Usually ships within 2 business days.

Product Video:








Product Photos:

Concrete Countertop Mix MirrorStone

Product Detail:

Mirror Stone brand Concrete Countertop mix.

Great for Precast or poured in place concrete countertops and furniture.

MirrorStone™ Seamless Countertops are an engineered man made hard surface countertop made of natural elements from the earth. This engineered concrete design gives you the beauty of marble with the durability of no other. It's custom fit from pouring in place gives you a solid surface without the seams which allows for a non stop one of a kind countertop. So, whether you are a DIYer or a contractor you can now create your very own seamless countertops for as little as what most training facilities charge for a single class.

MirrorStone™ Countertop mix has been designed to take all the guess work out of casting concrete counters. With its superior consistency, MirrorStone™ Countertop mix assures signature countertops with a glass-like finish without the messy grinding -- putting you ahead of the competition.

MirrorStone products are not eligible for any Expressions-LTD.com store Promo Codes or discounts.

Specifications:

Packaged in 64lb. buckets for easy handling and storage.

Each pallet contains 36 buckets.

Concrete countertop will weigh only 17lbs. per sq. ft. at 1.5" thickness.

7000 psi.

One 64lb. bucket produces approximately 4 sq. ft. at 1.5" thickness (3 sq. ft. at 2" thickness)

One pallet is 36 buckets.

7,000 psi strength rating from fully cured concrete piece (usually around 28 days).

Application:

Just add water to the mix; No other additives needed (other than Concrete Color if desired).

May also be Acid Stained once concrete is cured.

Shipping Information:

MirroStone usually ships within 5-7 business days.

Currently MirrorStone is only available in full pallet quantities.

Pallets (skids) ship via Freight (various carriers). If a lift gate is needed (ie. you don't have a forklift), the lift gate option must be selected above when ordering the pallet. Freight carriers charge extra for delivery if they have to supply a special truck with a lift gate to get the pallet off the truck.

Orders outside of the US, shipping will be slightly higher. Please contact us when ordering outside of the US.

Sample Photos:





































Above: Sinks made from the Utility Sink Mold, and 21" Farm Sink Mold.

Texas Doorbell

Product Detail:

Doorbell Button and Accent mounted on a natural stone piece.

Button illuminates in a warm amber color for nighttime visibility.

Each stone piece is unique and will vary slightly in appearance.

Doorbell is for use with wired, non-battery operated doorbell systems only.

This is a doorbell only- Chimes, Transformers and Wire are sold separately.

This doorbell can also be used to replace most garage door buttons.

Each doorbell is custom-made to order, so is non-refundable.

Product Specifications:

Available Stone sizes: 4"L x 4"W, 5.25" Tip to Tip. Narrow Travertine- 2"W x 4"H. Narrow Green Slate- 3"W x 6"H.

This doorbell requires a small hole approx 3/4" wide by 1/2" deep behind the doorbell for the back of the button to fit into.

Mounting adhesive included for simple installation to any surface.

Shipping Information:

This product usually ships within 2 business days.

Ships via UPS. Please make sure your Ship-To address is not a PO Box for this item.

Square LED Doorbell by spOre

Product Details:

Available LED button colors: Amber, Blue, Green, Red and White.

Detailed with a machined recess surrounding the button.

Made of soft-to-the-touch polymer resin, and satin finished anodized aluminum.

The soft touch poly-resin goes under the anodized aluminum faceplate and around the edges, creating a glowing side-wash.

LEDs color is very vibrant and efficient, using less that one watt, and will last approximately 11 years.

Product Specifications:

Measurements: 2 5/8" Diameter, 5/8" Deep.

Surface Mount Doorbell (no need for a hole in the wall- will mount flat to the wall).

Power Required: 8-16 Volts AC, 6-12 Volts DC.

Comes with tamper-resistant (hex head) screws.

1 year manufacturer warranty.

Shipping Information:

Product usually ships in 1-2 business days.

Additional Pictures:

Moose Doorbell

Product Detail:

Doorbell Button and Accent mounted on a natural stone piece.

Button illuminates in a warm amber color for nighttime visibility.

Each stone piece is unique and will vary slightly in appearance.

Doorbell is for use with wired, non-battery operated doorbell systems only.

This is a doorbell only- Chimes, Transformers and Wire are sold separately.

This doorbell can also be used to replace most garage door buttons.

Each doorbell is custom-made to order, so is non-refundable.

Product Specifications:

Available Stone sizes: 4"L x 4"W, 5.25" Tip to Tip. Narrow Travertine- 2"W x 4"H. Narrow Green Slate- 3"W x 6"H.

This doorbell requires a small hole approx 3/4" wide by 1/2" deep behind the doorbell for the back of the button to fit into.

Mounting adhesive included for simple installation to any surface.

Shipping Information:

This product usually ships within 2 business days.

Ships via UPS. Please make sure your Ship-To address is not a PO Box for this item.

Salmon Doorbell

Product Detail:

Doorbell Button and Accent mounted on a natural stone piece.

Button illuminates in a warm amber color for nighttime visibility.

Each stone piece is unique and will vary slightly in appearance.

Doorbell is for use with wired, non-battery operated doorbell systems only.

This is a doorbell only- Chimes, Transformers and Wire are sold separately.

This doorbell can also be used to replace most garage door buttons.

Each doorbell is custom-made to order, so is non-refundable.

Product Specifications:

Available Stone sizes: 4"L x 4"W, 5.25" Tip to Tip. Narrow Travertine- 2"W x 4"H. Narrow Green Slate- 3"W x 6"H.

This doorbell requires a small hole approx 3/4" wide by 1/2" deep behind the doorbell for the back of the button to fit into.

Mounting adhesive included for simple installation to any surface.

Shipping Information:

This product usually ships within 2 business days.

Ships via UPS. Please make sure your Ship-To address is not a PO Box for this item.

Navy Doorbell, Pewter Finish

Product Detail:

Doorbell Button and Accent mounted on a natural stone piece.

Button illuminates in a warm amber color for nighttime visibility.

Each stone piece is unique and will vary slightly in appearance.

Doorbell is for use with wired, non-battery operated doorbell systems only.

This is a doorbell only- Chimes, Transformers and Wire are sold separately.

This doorbell can also be used to replace most garage door buttons.

Each doorbell is custom-made to order, so is non-refundable.

Product Specifications:

Available Stone sizes: 4"L x 4"W, 5.25" Tip to Tip. Narrow Green Slate- 3"W x 6"H.

This doorbell requires a small hole approx 3/4" wide by 1/2" deep behind the doorbell for the back of the button to fit into.

Mounting adhesive included for simple installation to any surface.

Shipping Information:

This product usually ships within 2 business days.

Ships via UPS. Please make sure your Ship-To address is not a PO Box for this item.

Real Bell Ring Doorchime by spOre

Product Details:

The spOre RING door chime is a real bell chime, with an authentic 'ring' sound.

The old-school RING doesn't have to hide in the closet. The RING doorbell has a true "ding ding" sound provided by a large 4" diameter bell. RING details and materials are
finished to complement spOre doorbell buttons. The hardwire installation is simple.

Listen to listen to a short sample sound of the bell ringing.

Available in Poished Aluminum (Chrome) or Architectural Bronze finishes.

Mounting plate (behind the bell) and center nut are satin finished anodized aluminum.

Simple installation works new and most existing doorbell systems.

This is not a complete doorbell system- it is only the chime. Doorbell buttons, low voltage power transformers, and bell wire are sold separately.

Product Specifications:

Measurements: 4 1/4" Diameter Mounting Plate, 4" Diameter Bell, 1 1/2" Deep.

Download the Spec Sheet.

Bell is made of 20 gauge steel.

Power Required: 8-16 Volts AC, 6-12 Volts DC.

Comes with mounting screws.

Shipping Information:

Product usually ships in 1-2 business days.

Sample Photos:

Stainless Steel Doorchime, Palm

Product Detail:

Stainless Steel door chime cover, with Palm Trees detail.

Includes stainless steel cover, doorchime unit, and optional LED back lighting bar ($15 extra).

Doorchime unit makes a standard 'ding-dong' sound. It has a front and rear doorbell button connections, and plays a different sound for each.

Designed for use with a 16 volt transformer (sold separately).

Easy to paint if desired, using spray cans available at your local home improvement center. Simply clean the stainless steel cover to remove any dirt or grease, apply a few light coats of Metal Primer, and then when dry, apply a few light coats of the desired color spray paint.

This Stainless Steel Cover can be used to replace many existing door chime units. Please see pictures below, and if your chime looks like the one pictured, this cover will most likely replace your current plastic cover (so no need to take your current door chime off the wall, just slip this cover over it).

PLEASE NOTE: If ordering the optional LED back lighting, the LED bar included must be wired directly back to the transformer. If you wire the LED bar to the doorchime unit itself, it will only light up when the doorbell button is pushed!

Product Specifications:

Chime dimensions: 7 1/2"W x 6 1/2"H x 2 1/2"D.

Connects to a low voltage 16 volt transformer (standard doorbell power supply).

Optional LED Back Lighting Bar must be wired directly to the 16 volt transformer.

Mounting screws and instructions included.

Shipping Information:

Usually ships within 1-2 business days.

Included items:



Replacing an existing chime cover:





Additional Images:

Garden Smile Door Knocker

Product Detail:

Solid Brass Door Knocker.

Finished with a Verdigris patina, and polished to create a beautiful contrast with the unpolished recesses.

Door Knocker is hinged to a back striker plate. A fully functional 'Knocker'- not just an attractive door centerpiece.

Product Specifications:

Door Knocker dimensions: 5 1/2"W x 7"H.

Mounting screws and installation instructions are included.

Shipping Information:

This product is made-to-order, and takes a few weeks to ship.

Usually ships within 3-4 weeks.

Ships via UPS. Please make sure your shipping address is not a PO Box for this item.