Product Details: No Solicitors plaque cut from solid stainless steel, 3/16" thick, with a brushed finish. Available in Illuminated LED push buttons that use less than 1 watt, and last approx. 11 years, or in a non-lit button. LED buttons available in Ring-Light, or DOT style. Ring Light: A bright glow ring around a stainless steel center. DOT Light:Very bright center LED glow. Push Buttons available in 3 voltages: 12V (8-12 Volts AC) or 16V (12-16 Volts AC) or 24V (12-24 Volts AC). Match to your doorbell/doorchime transformer output, or use a voltage tester on your existing wires to determine voltage Exceeding the button's voltage can prematurely burn out the LED in the button. If unsure, and unable to determine, we recommend ordering the 24V button to prevent the LED from premature burnout. Doorbell Buttons are theft-resistant. Each button is secured on the back of the doorbell cover by a hex-nut. Will work with new or existing doorbell systems. Doorbell/No Solicitor Sign only. Door chimes, power transformers, and wire sold separately. Additional LED colors and Voltages are available for large quantity special orders. Product Specifications: Doorbell Cover Measurements: 3" Diameter x 3/16"D. Push Button Measurements: 11/16"W x 5/8" Thread Diameter x 1 3/4"L. Installation Instructions: Drill 3/4" (20mm) hole approximately 1 1/2" deep. Attach one wire to each screw terminal. Use the screws provided to mount the door bell in place. Optional Tamper Resistant screws come with a special driver bit for installation/removal. Shipping Information: Product usually ships in 1-2 business days. Warranty Information: One year manufacturer warranty against defect.
Sample Photos: 
Back side of a stainless steel doorbell, and optional Security Screws with Driver Bit (vandal and theft resistant).
No comments:
Post a Comment