Tuesday, July 17, 2012

Tile and Grout Sealer, Wet Look Finish

Unsealed and unprotected tile and grout can stain, chip, crack or fade. Apply CCI Tile Armor™ Enhancer to your tile, natural stone and grout to protect against staining and damage or as a pre-grouting sealer.

In addition to protecting your tile, grout and natural stone, CCI Tile Armor™ Enhancer will give your surface a "wet-look" without adding sheen.

 CCI Tile Armor™ can be used on grout, limestone, saltillo tile, clay tile, stucco and concrete/masonry.  Effective on interior and exterior applications.

For application tips view the Technical Data Sheet.

Please check local regulations for VOC requirements.

Finish: Matte "Wet Look"
Packaging: Pint, quart, and gallon

Coverage:

  • 20-25** sq. ft. per pint
  • 40-50** sq. ft. per quart
  • 160-200** sq. ft. per gallon
  • **Coverage rate varies based on type of tile, porosity and texture of the surface, temperature, humidity and application method.

Documents:

Posted by at
Labels: ,

1 comment:

  1. warlie05August 7, 2012 at 8:44 PM

    As tile and grout cleaning moves from low tech to high tech, more carpet cleaning companies are finding tile and grout cleaning to be more profitable than carpet cleaning.

    ReplyDelete

Subscribe to: Post Comments (Atom)