Expressions LTD is a design and manufacturing company, fabricating custom Molds and Forms for concrete. We carry a large assortment of decorative concrete products, as well as a line of unique doorbells, house numbers, mailboxes, custom signage, and outdoor / garden products.
Monday, December 3, 2012
Concrete Paper Stencil - Mediterranean
Mediterranean stencil. Available in 3 lengths, to best suit your need.
Stencils are designed for use with wet concrete and overlay resurfacing
systems. Manufactured using
superior high-strength white paper that can handle the toughest
conditions. White Paper Stencils are superior to most other
'brown' stencils, that are thinner, have problems laying flat, and tear
easily when used. Stencils are used to achieve the look of
stone, tile or brick without the higher installation and maintenance
costs associated with such applications.
Stenciled concrete
and overlays leave a flat and even surface better suited for pool
decks, walkways, driveways and interior floors. Non-adhesive
white paper stencils which are poly-coated on both sides for maximum
moisture resistance. Made of thicker paper, these stencils may be used
more than once depending on application method.
Product Specifications:
- Mediterranean Coverage:
- Quarter-Box: Roll is 32" Wide (Approximately 250 sq. ft. of coverage)
- Half-Box: Roll is 32" Wide (Approximately 500 sq. ft. of coverage)
- Full-Box: Roll is 32" Wide (Approximately 1000 sq. ft. of coverage)
- Average Brick Size: 21" x 13 7/8"
- Joint Width: 1/2"
- *NOTE: Pattern measurements may vary slightly due to normal manufacturing tolerances.
Stencil Application:
- Stencils are Designed for Professional Use
- Standard Application Method- Fresh Concrete:
- Apply stencil to fresh concrete. Lightly press stencil evenly into concrete surface. Apply color hardener and/or antiquing release agent followed by texture mats. Remove stencil when cement paste is set up enough to flake off the stencil.
- Standard Application Method- Overlay
- Lay the stencil down on the existing concrete surface. Once stencils are evenly laid out and flat, spray an Acrylic Overlay straight down, not at an angle, over the stencils. Remove stencil carefully.
- Alternate Application Methods:
- Trowel over stencils with a thin layer of Micro-Topping.
- Careful use of acid stain is also possible over a stencil, but recommended for experienced applicators only.
Subscribe to:
Post Comments (Atom)
|
No comments:
Post a Comment