Expressions LTD is a design and manufacturing company, fabricating custom Molds and Forms for concrete. We carry a large assortment of decorative concrete products, as well as a line of unique doorbells, house numbers, mailboxes, custom signage, and outdoor / garden products.
All Dura-BLU Molds have Lifetime Guarantee against defect. This Guarantee does not cover misuse of the Molds (Dropping the Mold, Prying the Mold out using a screwdriver, Driving onto it with a truck tire... etc.).
Expressions LTD will not be held liable for any damage, misuse, or collateral damages resulting from use of any of our products. If there is a flaw or defect with a product, we will fix or replace the product.
Medium sized rectangle sink design with tight radius corners.
Kitchen sized drain.
Use two Molds side-by-side to create a double basin sink.
Create a seamless integral concrete sink and counter top, or form around to create a vessel sink.
Dura-BLU fiberglass Molds are reusable indefinitely with proper care.
Dura-BLU molds have the highest grade Industrial Gelcoat finish.
Dura-BLU Molds are made using the strongest commercial-grade resin, NOT out of GP (General Purpose fiberglass resin).
Each Dura-BLU Mold has an Internal Flange:
Inner Flange further strengthens and braces the Mold.
Creates a platform to screw into; securing the Mold to the form.
Allows clamps to be used to lift stuck Molds out of cured concrete.
Each Sink Mold comes with a disposable foam drain hole knockout. Additional Foam Knockouts available here.
A kitchen size re-usable Rubber Drain Plug is available here.
Oversized, extra-deep kitchen drain hardware designed for thicker concrete sinks sold here.
Warranty Information:
All Dura-BLU Molds have Lifetime Guarantee against defect. This Guarantee does not cover misuse of the Molds (Dropping the Mold, Prying the Mold out using a screwdriver, Driving onto it with a truck tire... etc.).
Expressions LTD will not be held liable for any damage, misuse, or collateral damages resulting from use of any of our products. If there is a flaw or defect with a product, we will fix or replace the product.
LITHOCHROME Tintura Stain is a low VOC, environmentally friendly stain that includes vivid reds, yellows, blues, pastel pinks and beiges and even grays.
The waterborne stain penetrates and bonds with porous concrete or cementitious toppings for permanent, nonfading, predictable colors.
When finished with a concrete sealer, it is durable enough for interior floors, walls, columns and other decorative features.
Tintura is formulated specifically to stain concrete or cementitious toppings. Unlike coatings or paints which often delaminate when used on concrete, Tintura chemically bonds with cured concrete that is uncolored, color hardened, or integrally colored. It is also compatible for use with cementitious overlay toppings.
Either a translucent or an opaque appearance can be achieved with this proprietary system. Up to three coats may be applied to increase color intensity. The final installed appearance will be unique depending on the color consistency, condition and porosity of the substrate and the cement and aggregates used.
DuraWax™ is an acrylic wax that forms a long lasting protective coating over concrete sealers, Epoxy, and Polyurethane coatings.
DuraWax is to be used to provide a sacrificial coat applied to absorb wear and future long-term maintenance of the floor easier.
DuraWax provides a tough, semi-gloss film that has reduced surface tension properties; reducing the effect of shoe scuffs.
The unique feature of DuraWax is that it is not necessary to strip previous DuraWax applications in order to reapply. When the buildup of the multiple applications needs to be removed, DuraWax strips with standard wax strippers.
Tough Film
Interior Use
Semi-Gloss
Slip-Resistant
Manufacturer's Training Video
Specifications:
Sold in 1, 5 and 55* Gallons (*55 Gallon Drums available upon request).
Coverage: 1000-3000 square feet per gallon. (Depends on porosity of surface)
Easy application- Apply with a damp mop. Buffer not required but can be used.
View the Durawax TDS for application instructions.
Designed for thicker concrete and stone sink depths.
Available in Stainless Steel and Oil Rubbed Bronze finishes.
Additional finishes available on special order (see below).
Ideal for concrete sink thicknesses of 1" to 1.5".
Basket Strainer is adjustable to accommodate thicker concrete sinks, up to 2" thick. Suggested concrete sink thickness is 1.5" (so as not to max out the strainer's thread distance).
Disposer Collar Flange fits all In-Sink-Erator models of food disposers (Should also be compatible with Kitchenaide, Emerson, Kenmore and Grainger brands).
Made in Italy.
Special Order Finishes:
Available by special order in 30 specialty finishes, such as copper, pewter, brass, etc. Contact us for more information.
Specialty finishes are $20 extra per drain, and take 2-3 weeks to get in stock.
When ordering a special order finish, please select the Special Order Finish from the drop down menu above, and then in the Notes section, type the finish name.
Woven 1/4" Nap super soft Mohair Rollers that are specifically designed for extra fine coating application such as concrete sealers (oil and water based enamels, varnishes, marine and industrial coatings, epoxies, and all paints on smooth surfaces).
Apply concrete sealers and coating finishes smoothly.
Roller covers are epoxy-set onto super strong, solvent resistant phenolic cores. Which means they won't fall apart when used with solvents and during cleaning.
Reusable (assuming proper cleaning after each use)
1" Brushes are high quality Finish Brushes for smooth work, not cheap throw away brushes that lose the bristles into your coating while using them.
Product Specifications:
Measurements:
Roller Frame: 14" Long, takes 6" mini rollers.
Roller Covers: 6.5" Long, 1" Diameter.
1" Brush: 1" Width.
Use: Roller Covers should be de-linted before use. Wrap roller cover with tape and peel off to remove any loose fibers. Both roller and brush should be use wet, meaning to get the paint or sealer on the brush/roller before attempting to roll the surface or touch up an area. Clean up using the suggested product for the specific paint/sealer being used.
"Chiseled Granite Rough Rock" edge detail, 3" tall. Very similar to our 3" Rough Rock edge face, with a slight difference in the center of the form liner where it forms more of a point- The edge of the finished concrete has more of the appearance that the 'Rock' edge was chipped out from above and below, creating a horizontal ridge running in the middle of the edge.
Create a rock edge on concrete countertops, pools, steps, etc.
Made of extremely durable polyurethane that can flex and stay strong.
Can be used in pre-cast or poured in place concrete work.
Cut to length easily with a utility knife or chop saw. Join cut pieces using silicone.
Fast and easy to place in a mold, and quick to clean after use.
Good for hundreds of uses- Actually gets better with each use as they 'season'.
"Shark" design, leaping right out of the sea, teeth bared!
Illuminated LED push buttons less than 1 watt, and last approx. 11 years.
LED buttons available in Ring-Light, or DOT style. Ring Light: A bright glow ring around a stainless steel center. DOT Light:Very bright center LED glow.
Doorbell Buttons are theft-resistant. Each button is secured on the back of the doorbell cover by a hex-nut.
Will work with new or existing doorbell systems, and can replace most garage door opener buttons.
Doorbell Only. Door chimes, power transformers, and wire sold separately.
A liquid release for stamping tools and decorative concrete.
Clear Bond-Breaker, designed to prevent stamping tools from sticking to the concrete.
Unique blend of ingredients leaves no residue of any kind. Looks, feels and smells just like the reliable old bubble gum release, but the difference will be obvious to the trained professional.
Interior/Exterior use. Will extend tool/stamp life.
Liquid release is an alternative to dry powdered release, and designed to be used when a mottled, antiqued appearance is not desired.
Complete drain assembly for use with the "Wave Sink" molds, and "Ramp" style sink molds, and other slot-drain style sinks.
The small 'Mini' size can be used with any normal bathroom sized sink where a normal round drain isn't desired. Example- using a 1.5" long piece of Plexiglas to create a mini-slot drain on a bathroom sink mold, normally designed for a round hole in the concrete.
Drain pan attaches to the under side of the concrete sink, catches the water that falls through the concrete sink's slot-drain, and drains into a standard 1 1/2" diameter drain pipe (drain pipe(s) not included).
Made of very durable Black ABS plastic, 1/8" thick.
Shallow profile (approx. 1" deep), and sloped toward the center to assist water to flow to the drain pipe.
Drain pan has a small flange lip to attach screws through into the concrete if needed, and to provide a surface to silicone for a water-tight seal. Flange can be easily trimmed or sanded down if a smaller overall size is needed.
A Stainless Steel version of this drain kit is Available Here.
Full Bulnose is also referred to as a Half Round profile.
Creates a 2 1/4" height edge to the in-place concrete countertop.
Each box includes 8x 8' Countertop Forms (96 lineal feet), and 6x 8' Back-Wall pieces (48 lineal feet).
Easy to set up and use, for both professional and DIY.
The Full Bulnose edge will create a tiny small lip at the top of the concrete, due to the thickness of the plastic form itself. If this is not desired, either polishing the finished concrete surface to remove it, or troweling the concrete surface down to just under the height of the countertop edge will remove the lip.
