Concrete Sealer Mohair Rollers Brushes

Select the product from the drop down above when ordering:

• Short Nap 1/4" Woven Mohair Roller and Roller Frame
• Replacement Mohair Roller Cover
• 1" Brush for Touch Up and Corners
  

Woven 1/4" Nap super soft Mohair Rollers that are specifically designed for extra fine coating application such as concrete sealers (oil and water based enamels, varnishes, marine and industrial coatings, epoxies, and all paints on smooth surfaces).

Apply concrete sealers and coating finishes smoothly.

Roller covers are epoxy-set onto super strong, solvent resistant phenolic cores.  Which means they won't fall apart when used with solvents and during cleaning.

Reusable (assuming proper cleaning after each use)

1" Brushes are high quality Finish Brushes for smooth work, not cheap throw away brushes that lose the bristles into your coating while using them.

Product Specifications:

• Measurements:
  
• Roller Frame: 14" Long, takes 6" mini rollers.
• Roller Covers: 6.5" Long, 1" Diameter.
• 1" Brush: 1" Width.
• Use:  Roller Covers should be de-linted before use.  Wrap roller cover with tape and peel off to remove any loose fibers.  Both roller and brush should be use wet, meaning to get the paint or sealer on the brush/roller before attempting to roll the surface or touch up an area.  Clean up using the suggested product for the specific paint/sealer being used.