Epoxy Coating, Shield 50 - Base Coat / Primer

Product Details:

Shield 50™ is a 100% solids, non-shrink, two component, straw or pigmented epoxy floor coating.

High-Build epoxy floor coating for light and moderate duty commercial and industrial use.

Use on dry concrete surfaces as a pigmented base coat, or clear (straw) top coat for foot traffic and vehicular pneumatic tire traffic.

Use as a base coat binder for Acrylic Flake or Quartz floor systems. (Lay the Shield 50 down, and then broadcast the Acrylic Flake or Quartz Sand onto the wet epoxy).

No VOC's - 100% Solids.

100% Cross-Linking

Good working time. Medium cure rate. Cures down to 50°F.

Excellent strength properties. High compressive strength. Excellent impact resistance.

DOT Non-Corrosive.

Easy to place. Use as a Neat Coating or Textured Polymer Overlay

Sold in 1, 3, 5, and 15 Gallons. Also available in 150 Gallons. Contact us if interested.

Application Instructions & Specs:

Coverage: 1 Gallon covers approx. 200 sq ft at 8 mils thick.

Apply by squeegee in left to right motions, and back roll with a short-nap roller at 90° angles to squeegee lines. Do not roll excessively, only enough to smooth material.

See TDS below for more information.

Shield 50 TDS (Technical Data Sheet).

Shield 50 MSDS (Material Safety Data Sheet).

Shipping Information:

This product usually ships in 2-3 days, via UPS only.

Colors:

Pigment Colors for Shield 50 and UV Shield Epoxies: